Glass Block CAD model..

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by meld_b, Jul 24, 2004.

  1. meld_b

    meld_b Guest

    Anyone seen a source for your basic glass block? I think they are 6x6x4
    inches?

    Thanks,
    -meld
     
    meld_b, Jul 24, 2004
    #1
  2. meld_b

    David Janes Guest

    : Anyone seen a source for your basic glass block? I think they are 6x6x4
    : inches?
    :
    http://www.arcat.com/details/pittsbur/prod0225.cfm

    The above link is to a building products site that lists, for one manufacturer
    (PPG), 19 configurations of hollow glass block products. They have many other
    types of glass block, many sizes and patterns. While 6x6x4 is common, you might
    want larger or smaller, thicker or thinner, when you find out how many different
    kinds there actually are.

    David Janes
     
    David Janes, Jul 24, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to make glass conductive

  2. BSIM3v3 model file with statistical model block for Monte Carlo Simulation

  3. render settings - glass/clear plastic

  4. PW2 - render refraction in air glass & water?

  5. making glass

  6. Glass materials

  7. How do I create a solidworks title block from a cad title block

Loading...