Foreshortened Dimensions

Discussion in 'SolidWorks' started by Wayne Tiffany, Nov 30, 2005.

  1. Wayne Tiffany

    Wayne Tiffany Guest

    Generally it's available on a right-click menu if applicable. Check there.

    WT
     
    Wayne Tiffany, Nov 30, 2005
    #1
  2. Wayne Tiffany

    SoCalMike Guest

    The help file says that SW will create a foreshortened dimension when
    SW determines that the dimension will be too large for the drawing
    view. Is there any way to force this type of dim?
     
    SoCalMike, Nov 30, 2005
    #2
  3. Wayne Tiffany

    John Layne Guest

    Right click the dim and select properties, there is a display as
    foreshortened check box, or at least there is in 2005.

    John Layne
    www.solidengineering.co.nz
     
    John Layne, Nov 30, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Misbehavin' Dimensions

  2. ssget Rotated and Diameter type dimensions

  3. Change dimensions from paper to model space

  4. fixing exploded dimensions

  5. How to turn off existing Alternate dimensions and everything else remain the same?

  6. Dimensional Help Please - Foreshortened Radius

  7. Foreshortened linear dimension?

  8. Foreshortened diameter dimension - how?

Loading...