FlexLM License Server transfer

Discussion in 'AutoCAD' started by Peer Hoffmann, Aug 12, 2004.

  1. Hi ...
    Due to a hardware error I have to move the AIS licenses to a new(er) server.
    I've installed FlexLM on the new server and obtained a new license file.
    My question is: Can I / how do I change licenses from one server to another
    without the users noticing it?

    Peer Hoffmann
    CAD/CAM System Manager
    Ambu A/S
     
    Peer Hoffmann, Aug 12, 2004
    #1
  2. Peer Hoffmann

    Donovan Cox Guest

    I don't think you can for the AutoCAD side Peer. If you installed Inventor
    from the cd and told it that it was a network version it might not have a
    glitch, so that might be good news.
    But just look forward to a late night.
     
    Donovan Cox, Aug 12, 2004
    #2
  3. Isn't it so that MDT/Acad as well as Inventor just looks for the network
    license and then comes up with a dialog box saying 'Specify license server
    or license file' and if you tell the server name all is fine?
     
    Peer Hoffmann, Aug 12, 2004
    #3
  4. Peer Hoffmann

    Donovan Cox Guest

    , I know any Mdt/Acad will. I've never moved a network install of Inventor
    so I'm not so sure of that.
    My thought is because inventor doesn't need you to specify a license server
    if you install it from the disk, you'll be okay. If you installed it though
    a network image you may have to tell it where the new server is.
     
    Donovan Cox, Aug 12, 2004
    #4
  5. OK-now I've shut down the old server and checked the 'Force Server Shutdown'
    because there are borrowed licenses.

    From the Debug.log file:
    *********
    9:56:18 (lmgrd) Cannot lmdown the server when licenses are borrowed
    (-120,567)
    *********

    What does this mean - can't we repair the old server yet?

    Peer
     
    Peer Hoffmann, Aug 13, 2004
    #5
  6. Peer Hoffmann

    Donovan Cox Guest

    You may have to force the licenses to be checked in. Then shut it down
     
    Donovan Cox, Aug 13, 2004
    #6
  7. Hi Peer,

    the problem is that you first clicked stop server and only then checked
    "Force Server Shutdown" so, now you need to restart your server, check that
    check box and then click stop server.

    Hope this helps,

    Efim
     
    Efim Tetelman \(Autodesk, Inc\), Aug 16, 2004
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.