Flash and CAD

Discussion in 'AutoCAD' started by cabarita, Jan 28, 2006.

  1. cabarita

    cabarita Guest

    I want to incorporate CAD drawings in to Flash movies. Any suggestions
    on the process?
    Thanks.
     
    cabarita, Jan 28, 2006
    #1
  2. cabarita

    ricky Guest

    you could plot the file as a .jpg then open in flash.
    go to page setup and change the plot device to "plottoweb jpg" (i think
    thats what it is)
    you change the file name and location at the lower right hand side.
    thats one way of getting a cad drawing in flash
    hope this helps
     
    ricky, Jan 28, 2006
    #2
  3. cabarita

    clambam Guest

    Try exporting to to an EPS file first, then import the EPS file into Flash.
    Flash will also import AI and WMF files, so the trick is to get the CAD file
    into your favorite illustration program first.
     
    clambam, Jan 29, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cad Technician currently available for subcontract (offsite/telecommuting) CAD drafting/design.

  2. Flash Drive

  3. 2D CAD and 3D drawings coloring/retouching - Looking for partnership with CAD companies

  4. OT Flash-based USB stick with a capacity of 8 GB

  5. OT Flash Hard Drives Are Coming Soon

  6. dwg to flash

  7. CAD-drawings re-touching and coloring - DMB Design also looking for partnership with CAD Companies

  8. instal civil 3d 2008 on USB flash?

Loading...