femur model

Discussion in 'SolidWorks' started by John Fraser, Aug 14, 2003.

  1. John Fraser

    John Fraser Guest

    G'day,
    Anybody got a model of a human femur they would share? It is for a machine I
    am designing to test hip implants. I can get hold of a cadaver bone and
    measure and model, but I am not exactly crazy about the idea!
    Regards
    John Fraser
    Tinfish
     
    John Fraser, Aug 14, 2003
    #1
  2. John Fraser

    Philippe Guglielmetti Guest

    Philippe Guglielmetti, Aug 17, 2003
    #2
  3. John Fraser

    Pablo Guest

    Pablo, Aug 17, 2003
    #3
  4. John Fraser

    John Fraser Guest

    Thanks guys,
    This will get me started. I found the BEL site over the weekend but was put
    off by their "non-commercial" use requirement. If I find anything else I
    will post back here.
    John

     
    John Fraser, Aug 18, 2003
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. BSIM3v3 model file with statistical model block for Monte Carlo Simulation

  2. model tree displays incorrect model

  3. Need model or someone to create a model

  4. Human Femur Modal analysis using ANSYS program

  5. create 2D template (for physical model) from 3D Autocad model

  6. SURFACE MODEL TO SOLID MODEL???

  7. solid model vs 3d wire model

Loading...