Extrusion Depth in design table and with equation

Discussion in 'SolidWorks' started by JohanLingen, Mar 16, 2006.

  1. JohanLingen

    JohanLingen Guest

    Is there any way I can regulate the Depth of an extrusion through a
    design table?
    Also I want one extrusion depth to be coupled with a dimension (the
    diameter of the sketch it is derived from).

    I cannot name the dimension of the depth of a boss (which could be
    useful with design tables).
    When I use the name SW gives to that (like "D1@annotations") in an
    equation, the equation gives a correct outcome but, the dimension and
    the boss itself are not changed.

    Thanks for your help!
     
    JohanLingen, Mar 16, 2006
    #1
  2. JohanLingen

    Timelord Guest

    Try this: Don't type the depth dimension name into the design table,
    make it visible (set to view all annotations) and select it in the
    graphics area.

    Timelord
     
    Timelord, Mar 16, 2006
    #2
  3. JohanLingen

    JohanLingen Guest

    You're the greatest, I didn't see it first, but after a double click on
    the feature... de dimension is simply visible and I can rename it,
    change it value, etc... case solved!
     
    JohanLingen, Mar 17, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Problem with setting active depth

  2. Rib with constant draft, variable depth.

  3. Design table generated assembly does not stick to its table parameters inside another assembly

  4. Does anyone design plastic extrusion tools in SW?

  5. Design table or equation, 4in pitch on diameter that changes

  6. Gauge Table & Design Table

  7. Drawing table values linked to values in design table?

  8. Create planes by equation/table

Loading...