extrude wall no radius with out the line in wf2

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by henry1951, Oct 13, 2005.

  1. henry1951

    henry1951 Guest

    Hi all,
    in proe 2001 when create extrude wall no radius,
    at the edge new wall attached to, do not have a line,
    in wf2 i see the line,
    any one know how to created new extrude wall no radius with out
    the line at attached edge.
    thanks
     
    henry1951, Oct 13, 2005
    #1
  2. henry1951

    David Janes Guest

    In looking through the Help on sheetmetal, I found a lot of configurable items,
    more than I realized from looking casually through config.pro. One of those
    options is called merge_smt_srfs_without_seam. If you put this in config.pro and
    set it to yes, it should get rid of the seam you're seeing.
     
    David Janes, Oct 16, 2005
    #2
  3. henry1951

    henry1951 Guest

    Thanks! David
    I will give it a try,
    I just find out that is the bug in wf2 ptc trying to fix it.
    I thing ptc just make it worst every time they released new version,
    henry
     
    henry1951, Oct 18, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. It's driving me up the wall....

  2. Sheetmetal in WF2 - extrude an attached wall?

  3. Sweep with path vs Extrude with path

  4. Get sketch "out" of Extrude feature

  5. Radius to Radius

  6. flaten out a 3d radius

  7. Brace Wall Panels & Alternate Brace Wall Panels.

  8. How do I center the door jamb on a brick veneer wall - Arch Desktop R3

Loading...