Extracting the substrate model using Calibre PEX

Discussion in 'Cadence' started by angelia820, Jul 31, 2007.

  1. angelia820

    angelia820 Guest

    Hi all,

    I am using a flow which includes Calibre PEX,
    and I would like to extract the substrate model using the tool.
    For instance, I want to know the parasitic resistance of the substrate
    between the one P+ guarding and another P+ guardring 10um away, which
    are connected to ground net.
    Can't I extract them only (without any other active circuit) ?
    I want to figure out the dependency of the parasitic resistance on the
    distance among the P+ guardrings.

    Any ideas or suggestions welcome.

    Thanks in advance.

    Angel Park
     
    angelia820, Jul 31, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Calibre PEX, Capacitances node VSS! grounded to VSS!?

  2. Using SNA (Substrate Noise Analyser) in non-interactive mode

  3. Substrate Noise Analyst

  4. Substrate Noise Analysis

  5. substrate noise

  6. substrate stamping

  7. Who also designs in AMIS0.5u using the adsArtist + Virtuoso & Calibre

  8. Extracting a net with Mentor Calibre ?

Loading...