Excel BOM too big to see when editing

Discussion in 'SolidWorks' started by the_tool_man, Jul 24, 2007.

  1. the_tool_man

    the_tool_man Guest

    Hi all:

    Using SW2006 SP5 under WXP. When editing an existing assembly drawing
    with an Excel BOM inserted, sometimes I get the following strange
    behavior. I double-click (or right-click and choose edit) the BOM to
    edit it, and the Excel window that pops up is so large that it doesn't
    fit on the screen. There is no way that I can find to scroll, zoom,
    or otherwise see more than the first couple of rows and columns in the
    table. I've tried restarting SolidWorks, and restarting Windows, but
    this made no difference. The problem only happens occasionally, but
    is persistant with a given drawing. Once it happens, it always
    happens. The only solution I have found is to delete the BOM and re-
    insert it. However, this also deletes the other information that I
    have added manually. Is there another way to go about this? Any help
    would be appreciated.

    Regards,
    John.
     
    the_tool_man, Jul 24, 2007
    #1
  2. the_tool_man

    Dave Guest

    Hi John,

    While I don't use an Excel BOM, I do have an embedded WKS in my
    development drawing for the calcs used to validate flat patterns. If I
    copy the WKS for secondary profile proofing, it blows up as you
    describe. What I am forced to do is right click, select properties and
    then set the scale to .5. This sets the WKS to something I can fit on
    the page, but I still have to open it and tweak a column width before
    it scales properly.

    Hope that helps.
     
    Dave, Jul 25, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.