Examples of good UI

Jon, you realize you just got called out a half dozen times, and
didn't even make a single attempt at answering any of the questions
asked of you?

You have no idea what you're doing. Frankly, I'm surprised you can
even figure out how to post.

 

"and seeing as how the thread has burnt itself out now that the alt
machines crowd have arrived..."

alt.machines.cnc is a great group! Don't judge alt.machines.cnc by
idiots like Tom Brewer, Cliffy, John Carroll, Joe788, etc. who never
have anything specific to say about SolidWorks.

One of the reasons this thread is now off topic / perhaps the major
reason this thread is now off topic is the lack of participation by
Mark Biasotti who started the thread. Doesn't surprise me in the
least!

You could always move your focus for now to the thread I started on
the You Tube T-Splines video link I posted :>)

I believe the key to success of this forum is more specifics on
SolidWorks.

 

How's the job hunting going for you Jon?

With a shortage of machinists you should be employed already.

Tom

 

Still looking for a job Jon or you planning on making your fortune
like FX CAD selling training videos on eBay?

"FX CAD Solutions is the guy from Canada making a killing on E-Bay
selling" -Jon Banquer- Aug 30, 2007

Quick search on eBay FX CAD sold $5,000 SolidWorks Tutorials gross
spread out over the past couple of years.

Tom

 

"I've been away from SolidWorks for almost ten years." - Jon Banquer-
Aug. 26, 2007

"Your the embarrassment to this newsgroup when it comes to your
CAD/CAM posts. If you don't know shit why not just shut up until you
are willing to take the time and learn ???" - Jon Banquer- Jan. 14,
2003

"SolidWorks is consuming every available minute of my learning time
right now." - Jon Banquer - Aug 12, 2007

"For the record I like SolidWorks" Jon Banquer April 10, 1998

"I think SolidWorks will always be better at modeling and assembly
though. SolidWorks should have ALL the tools you need by April of 99
or close" -Jon Banquer - Oct 22, 1998

"Without a doubt SaladWorks is a complete piece of shit" - Jon Banquer
- May 21, 2006

"The program has changed so much in ten years that I'm still way
behind where I need to be." - Jon Banquer - Aug. 26, 2007

 

" I dropped out of high school to pursue my dream of making a lot of
money and never went back" - Jon Banquer - Dec 28, 2002

"make the video interesting like you did for the razor. Without a
practical real world example like the razor I find myself losing
interest quickly." - Jon Banquer- High School Drop Out with ADD,
posted Aug 3, 2006

"I'm the kind of person who doesn't learn very well reading" - Jon
Banquer - High School Drop - July 22, 2007

"Never made this claim. Got proof that I have said I'm an expert user"
- Jon Banquer - July 21, 2007

 

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Tom Brewer has in many ways become just like Cliffy and that's what
"Reverse Stalking" does to someone.

Perhaps Tom Brewer, like Cliffy, now desires to become more like
me! :>)

 

Tom Brewer's never ending deception about

How can that be Jon?

I never said anything about "real price paid in the market".

Care to explain?

Yep,
Tom

 

Completely shift the blame. Mark doesn't respond to bullshit posts from
an ignoramus so he is to blame for the idiocy that follows?

No wonder you're job hunting again.

Daisy.

 

So you ARE begging for more ads & demos? AGAIN?

 

<G>

 

Probably slept thru that part of the one demo video <G>.

 

His sayings about engineers are rather priceless too.
They run trains I expect.

 

Flooding with the same exact post over & over again IS SPAM
and, no doubt, a TOS violation.
Not very original, any more than all the multiple
posting aliases.

 

LOTs more than a mere dozen. LOTS !!!

Try "Put up or shut up" on him.
That almost always works. He cannot "put up",
being such a clueless parrot & plagiarizer of
the posts & ads of others.

Never posts much on machining either & when he tries
it's either dead wrong (bad practice too) or copied.

Blind truck driver or sweeper.

 

He'd have been dragged out frothing, kicking & screaming a bit
early, that's what he feared.
He's banned from trade shows now anyway I suspect. For
assult (with a limp weenie?)

 

[
SolidProfessor videos just smoke your book. From what I've seen of the free
myigetit videos they do as well. I hope to finish the SolidProfessor videos I
just purchased ( $600 Professional Package) in the next 2 weeks. When I do, I'll
spend the $25 for the myigetit SolidWorks 2007
] - jon banquer on Jul 14 2007

[
I highly recommend that SolidWorks users get the SolidProfessor videos that I
just spent $600 for. They are worth every penny! For those on a budget they can
try the $25 myigetit SolidWorks course. I intend to try it myself as soon as I
finish the SolidProfessor videos on SolidWorks.
] - jon banquer on Jul 26 2007

[
When I finish the SolidWork Bible (I'm about 300 pages into it) I will be
posting an extensive list of all the work that the SolidWorks Bible really
needs. ... Same with the SolidProfessor videos which are also not complete
enough.
] - jon banquer on Aug 3 2007


Today's date: Sept 2 2007

HTH

 

Clue: Pretty funny.
I'm the only responder to that idiocy.

Now he's probably wondering why it's idiocy ....

 

How are the little voices in your head today?
More crowded than usual?

WHY SHOULD THEY POST ABOUT SW IN AMC?
IS IT A GREAT CAM OR CAD/CAM PROGRAM? Or
even one at all?
Very clearly you don't know much about it. Or ANY
other. You are not even an entry-level user. No matter
how many ads & posts you copy from.

And everyone else in AMC know fullwell you are a nutjob
that knows little about CAD, CAD/CAM or CAM or machining
or machines or programming .....

But they know that in SW and in all those BBS systems
where you are banned too.

 

That you posted some more of your clueless idiocy & ads to it?