Error [1.5-15] -- XP Pro

Discussion in 'AutoCAD' started by alansimchick, Nov 18, 2004.

  1. alansimchick

    alansimchick Guest

    I have three Win XP machines running AutoCad 2004 from a network deployment. I currently have version 8.3c of LMTOOLS installed.

    I only get this error on the 2 XP PRO machines. 1 of the machines has SP1 and the other SP2. The other machine is XP HOME, and has never had this error.

    When I get the error, I can ping the server but cannot telnet into port 2700 or 2080.

    To work around this error, I've been deleting the ADSKFLEX_LICENSE_FILE from the system registry, and then re-booting. After a fresh reboot I can start Autocad without a problem ONE time.

    If I close Autocad and then try to re-open it, I get the error [1-15] again.

    I've looked through all the postings but nothing has helped.

    I'm open to any suggestions, as the work-around I am currently using is a pain.
     
    alansimchick, Nov 18, 2004
    #1
  2. alansimchick

    alansimchick Guest

    alansimchick, Nov 19, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Pro/Desktop <> Pro/E wildfire

  2. Pro/Mold & Pro/Cast

  3. need help finding tutorials for Pro/nc and pro/cmm

  4. 2005/05/22 PTC Pro Engineer Wildfire V2.0 M120, PTC Pro Engineer Wildfire V2.0 For XP64, new !

  5. Pro-Engineer (Pro-E) opening in Chennai 4+Years ( other Openings UG and CATIA V5)

  6. Pro/E, Pro/M help

  7. problem with pro E and pro Mechanica integration

  8. Speed of 64-bit Pro/E and Pro/M?

Loading...