DXF Macro

Discussion in 'SolidWorks' started by Brad, Feb 11, 2008.

  1. Brad

    Brad Guest

    After searching the group for an hour or so, I have seen quite a few
    posts on this subject. The bad news is that the posts that seem
    relevant to what I want to do don't give example code. Does anyone
    have a macro that creates a 1:1 DXF of a selected part face (or plane)
    they would be willing to share? I would like to automate the process
    for plasma table toolpaths.
    This is something that I had shelved after spending hours trying (read
    failing) to tweak the recording, now I need it again. Any help would
    be appreciated.

    Brad
     
    Brad, Feb 11, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Manipulate the element in the DXF from MicroStation, durin DXF are still DXF

  2. Macro Export Flat DXF Pattern

  3. Question about Sheetmetal dxf exports macro Mark Reimer wrote.

  4. Call a macro from another macro?

  5. Part Name Extraction for DXF Macro

  6. Macro for Part to Flat Pattern DXF?

  7. save as .dxf or convert .sldprt to .dxf

  8. Converting 2-D DXF to 2-D DXF possible?

Loading...