DWG / DXF part output weirdness

Discussion in 'SolidWorks' started by Deri Jones, Jul 24, 2003.

  1. Deri Jones

    Deri Jones Guest

    Has anyone else had problems with DWG export from SW? (SW2003 SP3). I am
    exporting parts as DWG prior to adding extra information in ACAD and then
    DXFing them for import to a Plasma cutter nesting programme.
    When I export to DWG, some of the parts seem to have:
    a. duplicate lines on top of each other
    b. some trimmed circles "invert" - tabs become notches, weld mouseholes
    become bumps etc.

    This only appears to happen on some mirror components - the original ones
    are fine. I can't identify what triggers this and it only appears to happen
    on features with a radius of less than 30mm or so.

    Any ideas?

    Thanks in advance
    Deri
     
    Deri Jones, Jul 24, 2003
    #1
  2. Deri Jones

    Deri Jones Guest

    Thanks - I'll get SP4 ASAP
     
    Deri Jones, Jul 24, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Spectre output control: No Output At All

  2. Manipulate the element in the DXF from MicroStation, durin DXF are still DXF

  3. SW2004 Loft Weirdness

  4. Output SW drawing document to autocad.dwg or dxf

  5. 2005 sp3 assembly weirdness

  6. Output of SW drawings to Colour Acad drawings or colour output of SW plots

  7. 2005 Weirdness

  8. SelectByPolygon Weirdness

Loading...