DWG/DXF Export - Problem

Discussion in 'SolidWorks' started by lmar, Feb 2, 2006.

  1. lmar

    lmar Guest

    Hello,

    Client has

    SW2006 SP 0.0

    Export SW Drawing as DXF/DWG.

    Start DWGEditor and open just exported file.

    Title block appears in Model Space at 45 degree anglel with insertion
    point at close to the 0,0,0 point.

    Tried the same thing on my development laptop (SW2006 SP3.0) and file
    exports and imports as one expects.

    Is this a SP 0.0 Issue or settings issue? Don't even know where you
    would request the 45 degree angle.

    They are in middle of a project and do not want to upgrade.
    Is there a work-around or setting that needs work?

    Len
     
    lmar, Feb 2, 2006
    #1
  2. lmar

    Rory Guest

    I heard of someone else that had this problem and I believe he said
    they had to explode all the blocks in the drawing and then it would
    export to dwg just fine. Other than that you might try dxf instead.

    Rory
     
    Rory, Feb 2, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Manipulate the element in the DXF from MicroStation, durin DXF are still DXF

  2. Trying to export DXF: Unable to open data file!!!

  3. DXF export for laser

  4. DXF export to AutoCAD loses dimension style, any way to avoid this?

  5. export sketch pts to dwg/dxf

  6. DWG / DXF Export issues.

  7. Export a Solidworks file as a DWG, or DXF

  8. SW 2008 - Export to dwg/dxf scaling

Loading...