dual install 03/04

Discussion in 'SolidWorks' started by neil, Oct 20, 2003.

  1. neil

    neil Guest

    greetings fellow sworksters : )

    is it sufficient to create another folder for the second install or would it
    be better to put it on a separate partition? also I have read here that 04
    messes up 03 printing-is this a universal problem or just experienced by
    some people? any other issues?
    thanks
    neil
     
    neil, Oct 20, 2003
    #1
  2. neil

    Bruce Wirkkala Guest

    We've dual installed in the same partition with no printing problems. I
    guess it's time to uninstall 2003 by now.
     
    Bruce Wirkkala, Oct 20, 2003
    #2
  3. neil

    Wayne Tiffany Guest

    Same here - no known problems.

    WT
     
    Wayne Tiffany, Oct 20, 2003
    #3
  4. neil

    Scott Guest

    There is a printing problem in SW04 that for some reason it send extra info
    to the printer. I printed a model that was completely empty and in the
    printer queue it read 9.16MB. So if your printer can't handle at a minimum
    of that then you will have some problems printing from SW04. Hopefully this
    is fixed in SP1

    Regards,
    Scott
     
    Scott, Oct 20, 2003
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. dual monitors

  2. dual Vth assignment with PKS

  3. Running Cadence with dual monitors

  4. x86 for Cadence... Dual-core or quad-core?

  5. Dual screen in Microstation J

  6. 04sp2.1 dual install trouble

  7. Dual install 2003 and 2004

  8. Interesting artical Dual Core versus Dual Processor

Loading...