Drawing views lost link to model

Discussion in 'SolidWorks' started by Steve Reinisch, Jul 25, 2006.

  1. Steve Reinisch

    Steve Reinisch Guest

    Somehow a drawing has lost the link to the model so the views no longer show
    up. If you check the properties of the view, a dashed box with an X thru it,
    it shows that it is looking at the right model file but there is just
    nothing in the view. Any body have an idea of how to get the views back?


    Steve R
     
    Steve Reinisch, Jul 25, 2006
    #1
  2. Steve Reinisch

    Eddie Guest

    RMB (Right Mouse Button) within the view bounding box and select
    "Show".
    Eddie
     
    Eddie, Jul 25, 2006
    #2
  3. Steve Reinisch

    Steve Reinisch Guest

    Thanks for the tip, found the 'show' command in RMB on the view in the
    browser rather than RMB in the view


    Steve R
     
    Steve Reinisch, Jul 25, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Break link between drawing and model?

  2. Lost Link.....

  3. Lost Drawing Link

  4. inserting sketch dimensions from annotation views automaticaly into drawing views

  5. dwg views do not reflect part model

  6. Annotation views - Saving section view in model

  7. Text appears in all views created from a 3D model

  8. Plotting 2d views of a 3d model (Autocad 2006 - vanilla)

Loading...