Drawing Excel BOM units

Discussion in 'SolidWorks' started by Wayne Tiffany, Nov 11, 2004.

  1. Wayne Tiffany

    Wayne Tiffany Guest

    Good news - it's recognized as a bug!

    SPR 239018 Dimensions shown in BOM do not respect drawing's units settings
    or decimal/fraction settings.

    WT
     
    Wayne Tiffany, Nov 11, 2004
    #1
  2. Wayne Tiffany

    Ron Waligora Guest

    Better news. I've been told that under SPR 241613, this units problem
    will be fixed on SP 1.0. (originally it was scheduled to be fixed on
    SP 2.0)

    RW
     
    Ron Waligora, Nov 16, 2004
    #2
  3. Wayne Tiffany

    Wayne Tiffany Guest

    I don't think I see the connection here. If I look up your SPR, this is
    what I see.

    241613 File properties containing quotes (') do not evaluate linked
    values correctly - worked in 2005


    This looks like a different issue.

    WT
     
    Wayne Tiffany, Nov 16, 2004
    #3
  4. Wayne Tiffany

    Ron Waligora Guest

    Those darn Techies! Seems I always have to double check 'em before
    spouting off. Now I still hope this will be corrected under SP1.0
    instead of SP2.0 where it was originally slated.
     
    Ron Waligora, Nov 19, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SI Units, Imperial Units, and why the two don't mix?

  2. Reading Excel File without starting Excel ?

  3. Drawing Units vs Part Units

  4. SW BOM versus Excel Based BOM

  5. Drawing Excel BOM units

  6. SW BOM to Excel BOM

  7. SW BOM OR EXCEL BOM

  8. Real to drawing units (architectural units)

Loading...