Dracula LVS/Extraction

Discussion in 'Cadence' started by Subhash, Nov 21, 2007.

  1. Subhash

    Subhash Guest

    We are using the Draculla for LVS and Extraction.
    We are required to add some features in Dracula rule file.
    So I need to use a variable and set a value (2*10E-06).
    Now I am going thru the dracularef manual provided by Cadence.
    But I am not able to find the solution.
    If anyone can suggest/ guide me in this it will be really helpful.
    Regards,
    Subhash
     
    Subhash, Nov 21, 2007
    #1
  2. Subhash

    andrewb Guest

    Youi'll have to give more details than that. Your question is too
    vague - I can't work out what you're actually asking or what you're
    trying to do.

    Regards,

    Andrew.
     
    andrewb, Nov 29, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Why LVS match but LPE power name missed on DRACULA and Calibre??

  2. Please help me! strange thing: Cadence ICFB extraction vs. spectre netlist extraction?

  3. Can I connect two global nodes in a Dracula LVS Spice netlist?

  4. Why the size of mos's w & l checked is wrong when I run lvs check using dracula?

  5. Problem about reducing series resistors for LVS in Dracula

  6. Dracula LVS

  7. Dracula LVS of S/D

  8. Dracula LVS question

Loading...