Does anyone use IMOLD by Manusoft

Discussion in 'SolidWorks' started by compton, Oct 4, 2006.

  1. compton

    compton Guest

    compton, Oct 4, 2006
    #1
  2. compton

    matt Guest

    I evaluated it about 3 years ago, I'm sure a lot has changed in that
    time. As I remember, they had a very slick method which when it worked
    was more powerful than the other software packages I was evaluating at
    the time, but I had difficulty when something out of the ordinary came
    by and you had to either intervene manually or change something you had
    done. Its completely possible that it was operator error, but that was
    my experience with it. I wound up going with MoldWorks / SplitWorks
    mainly because the software acknowledged and planned for the fact that
    sometimes you just have to do things manually because automated software
    can't plan for everything, and the fact that it had a nice automated
    mold library.

    Also evaluated was FaceWorks, which probably had the best cavity / core
    splitting of the three, but the salesman was way too pushy and
    uncooperative, plus they were limited to splitting core and cavity, they
    didn't have any kind of automated mold library. MoldWorks wasn't
    necessarily the best product, but I thought it was the best overall
    solution.
     
    matt, Oct 4, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.