DIMRADIUS centre mark help

Discussion in 'AutoCAD' started by Scott Manning, Dec 5, 2003.

  1. Hi people!

    I am a having a problem convincing DIMRADIUS to add the centre mark or
    lines. DIMCEN is set to 2.5, and I have tried to draw the dim with the text
    on the outside on various size circles but it still won't display! :( If I
    use DIMCENTRE after the drawing the dim the mark appears. Would PDMODE
    effect this (currently set to 1, have tried 32)? I have another drawing that
    the mark appears in that dim style, but after coping the dim into the other
    drawing, if fails to add the mark. Any thoughts are much appreciated.

    Thanks in advance

    Scotty
     
    Scott Manning, Dec 5, 2003
    #1
  2. Scott Manning

    Robert Guest

    In the dimension style format set your text outside horizontal only and set
    vertical justification to the outside
    in geometry style choose center mark with a value greater than 1 and set
    your overall scale to a higher number it should do the trick.

    Regards

    Robert
     
    Robert, Dec 7, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.