Dimensioning problems with arcs or circles

Discussion in 'SolidWorks' started by glb, Feb 22, 2005.

  1. glb

    glb Guest

    We're using SW2005, 0.1. When opening existing drawings containing arcs
    or circles, the dimensionwitness lines often move to a minimum or
    maximum quadrant instead of remaining in the center. Also when placing
    a linear dimension between small circles; often times one of the circle
    quadrants is selected instead of the center of the circle. Having to
    continuously zoom in and out to properly dimension becomes annoying
    quickly.

    As this did not happen in SW 2003 that we upgraded from; is there any
    setting to turn off this type of inferencing, or a filter toggle that
    will select only centers of circles?

    Thanks in advance,
    Greg
     
    glb, Feb 22, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Entmake Polyline with Arcs

  2. circles with width like polyline?

  3. fill area with circles

  4. Need help with dleteing all TEXT, CIRCLES, LINES from one "class/sub class" in Allegro

  5. Dimensioning to Centers of Circles & Arcs (& not max/min)

  6. Find Circles and arcs in a drawing

  7. Dimensioning in paper space- Problem with arcs

  8. I need dxf files with polygons with circular arcs

Loading...