Dimensioning problem?

Discussion in 'SolidWorks' started by Reinder Herder, Nov 19, 2003.

  1. Reinder Herder

    Reinder Herder Guest

    I am a newby, last week I followed some lessons in the 2004 version.

    One problem occured.
    When I try to dimension for example a rectangle, I get this message:

    'The Microsoft Jet-database-engine can't find the table or query
    ISO_hole_FITs'

    and then (after clicking OK)

    'The Microsoft Jet-database-engine can't find the table or query
    ISO_shaft_FITs'

    after clicking this away the prog seems to work correctly, so far anyway.

    But these alert-screens irritate.

    Who can help me out?

    Thanks,
    Reinder
     
    Reinder Herder, Nov 19, 2003
    #1
  2. Reinder Herder

    Corey Scheich Guest

    Sounds like something wasn't installed, possibly with the hole-Wizzard.
     
    Corey Scheich, Nov 20, 2003
    #2
  3. Reinder Herder

    Reinder Herder Guest

    I reinstalled SW2004 and the problem is solved.
    After this I also noticed that in ..\data\databases is a file called
    'fit.mdb' in which the requested files can be found.
    I am not sure it existed first, think not

    I guess the problem was caused by me installing SW2004 over the existing
    SW2003.

    Thanks for your help!!

    Reinder

    ~~~~~~~~
     
    Reinder Herder, Nov 21, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help with dimensioning an ellipse

  2. Dimensioning the length of a curve

  3. showing z-depth info within dimensioning

  4. Dimensioning Arc Length

  5. Dimensioning Arcitectural/Fractional

  6. Dimensioning

  7. Dimensioning problem

  8. Dimensioning in paper space- Problem with arcs

Loading...