Design tables

Discussion in 'SolidWorks' started by Dennis, Dec 1, 2004.

  1. Dennis

    Dennis Guest

    Can the text that is used to cut into a face be controlled in a design
    table? if so how?
     
    Dennis, Dec 1, 2004
    #1
  2. Dennis

    CS Guest

    What do you want to control the text string or location or size.

    I know you can control the location if you associate it with a line and move
    the line with the design table. I don't know anything else is possible I
    seriously doubt it though. Submit an enhancement request.

    I have an enhancement request too, How about if I submit an enhancement
    request and it was already implemented I just can't find it let me know
    where it is.

    Corey
     
    CS, Dec 1, 2004
    #2
  3. Dennis

    JRat Guest

    Hi Dennis,

    You can use Suppress/Unsuppress state to control the string.
    Perhaps this is a temperory solution. We need enhancement to control
    the text directly in DesignTable.

    Regards.,
    JRat
     
    JRat, Dec 2, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Assemblies, Configurations, Equations & Design Tables

  2. Updateing design tables in drawing

  3. Cosmetic threads in design tables

  4. Tables? Gear tables?

  5. Missing Design Tables?

  6. any way to put tolerances in design tables ?

  7. Driving Design Tables from an Assembly

  8. compare 2 tables and in result page only display changes from tables

Loading...