design table issue...

Discussion in 'SolidWorks' started by IYM, Dec 1, 2009.

  1. IYM

    IYM Guest

    We have a part file with hundreds of design table driven configurations.
    Today, we went to edit it and discovered the embedded excel design
    table was blown out and they are all manual. We have a working back up
    from a while back and I was thinking about replacing the current one
    with the known old one (unless someone can tell me an alternate way of
    re-associating an embedded design table that no longer appears. Does
    SWx have a summary telling me how many configurations are in a part?
    I'd be nice, for example, to see that I have 560 configs in the
    "corrupted" Design table missing file, and 560 in the back up and not
    have to count configurations.

    Any ideas?
     
    IYM, Dec 1, 2009
    #1
  2. IYM

    Keith Streich Guest

    Save the old design table externally, then insert that table into the newer
    (missing table) part.

    That table should take control of all configurations and show any new
    configs not driven by the old table.

    Keith
     
    Keith Streich, Dec 2, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Design table generated assembly does not stick to its table parameters inside another assembly

  2. ISSUE: Revision table template

  3. Gauge Table & Design Table

  4. Drawing table values linked to values in design table?

  5. Another design table issue!

  6. TABLE:copy cell with references to another table

  7. Copy Table Cell to Table Cell

  8. TTF formatting in Table text makes table unselectable when you click on cell text

Loading...