Datum Feature Problem

Discussion in 'SolidWorks' started by Seth Renigar, May 12, 2004.

  1. Seth Renigar

    Seth Renigar Guest

    I don't normally use the Datum Feature in my drawings. Due to the nature of
    what we build, it is not needed very often. However, I am doing a project
    that is requiring different dimensioning techniques and I am using these.

    When I insert them there is no problem. Everything works great, looks
    great. I then close the drawing. If I open that drawing the next day or
    so, there will be EXTRA Datum Features randomly placed throughout the
    drawing. This has happened on 3 of the 5 drawings I have created so far on
    this project.

    Anybody seen this? Is there something that I may be doing that is causing
    this, or do I need to report it?

    SW2004 SP3.0
    WinXP Pro
     
    Seth Renigar, May 12, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Distance from Profile Block to Datum line

  2. How to obtain the datum of system variable "distance"

  3. Edit feature with internal datum [wf2]

  4. Datum Feature Symbols in Drawings

  5. Can Feature Names be linked to a Dim Value in that feature?

  6. Feature index in SW Feature tree ?

  7. Datum feature symbol

  8. SW2008 - Feature or No Feature

Loading...