Data Decoding at 10 Gbit/s

Hi,

I would like to design a 16 channel SERDES ASIC in 0.13µm running at 10
Gbit/s per channel. For transmission a standard 8B/10B is to be applied. My
concern is now how to achieve real-time decoding of the 8B/10B transmission
code at 10 Gbit/s with that technology? Can that easily be achieved? What is
state-of-the-art? As far as I know the 8B/10B decoding cannot be down by a
simple lookup table because the corresponding code words depend on the
running disparity of the previous transmitted data and there is no simple
1-on-1 mapping.
Since the 8B/10B coding is a self-synchronizing (?) code (i.e. the clock can
be retrieved from the transmitted data) I would have to use a kind of clock
recovery at my SERDES input. Another question would be if a PLL at the input
is advisable or even feasible at data rates of 10 Gbit/s.

I would be very thankful if some of you could give me a hint.

Best Regards

Martin

 

Vitesse is certainly achieving >10Gbit/s in 0.13um - ISTR that they
also have done 12.5Gbit/s. They have chips doing 10Gbit/s SERDES for
at least 2 years now, but as far as I remember, this is only 1-4
channels per chip. YMMV.

It's only a 1GHz encoding/decoding rate (parallel datarate), so I
don't see why it should be a problem. Again, Some/all of Vitesse
10Gbit/s chips implement 8B/10B.

Disclaimer: I don't work Vitesse (any more).


Kai

 

Joseph...dismissed!