Data Base

Discussion in 'AutoCAD' started by Tai, Jan 17, 2004.

  1. Tai

    Tai Guest

    how can we extract the geometry information for an AutoCad drawing
    including the coordinates (x and y) to a database file.

    thanks for any kind of help

    Tai
     
    Tai, Jan 17, 2004
    #1
  2. Tai

    Sinisa Knezevic Guest


    What kind of information you want to extract (what else beside coordinates)
    and what kind of database file you want to make?
    Is it simply *.txt file, or you want to make *.mdb (MS Access file) or
    something similar?
     
    Sinisa Knezevic, Jan 17, 2004
    #2
  3. Tai

    bestafor Guest

    If you know how to read a DXF file then dxfout will do it.
    db connect in the help section will explain how to connect
    to a external data base such as db3.
     
    bestafor, Jan 17, 2004
    #3
  4. Tai

    Glen Appleby Guest

    You can link the DWG file to an Excel file, interactively. Check
    the ACAD help files on how to do that.
     
    Glen Appleby, Jan 18, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. data out data in

  2. Copy with Base Piont

  3. Base point block

  4. log base 10

  5. Data Extent, checking for data out of boundary layer

  6. Data base information for terminals

  7. Lost data, saving w/ rollback on, power failure fried data?

  8. Object Data in the autocad dwg data

Loading...