Dark renderings to disk?

Discussion in 'SolidWorks' started by JJ, Apr 5, 2004.

  1. JJ

    JJ Guest

    I've been finishing some SW2003 PW rendering examples and have noticed that
    the image if written to the disk is significantly darker than the image that
    SW displays, the gamma makes no noticeable difference, any one have any
    experience with this?

    Best JJ
     
    JJ, Apr 5, 2004
    #1
  2. JJ

    Corey Scheich Guest

    I presume you are using PW2. I had the same problem and I believe changing
    the gamma to 1 worked for me. I believe the default was 1.5 or 2. Anyway
    if you have tried a gamma value of 1 and didn't see better results I don't
    have any more input, sorry.

    Corey
     
    Corey Scheich, Apr 5, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. howto prevent spectre from chrashing while running out of disk space

  2. disk space for spectreS simulations

  3. hard disk reader chip

  4. file open error from zip disk

  5. going over to the dark side

  6. Hidden lines and edge linesshowing as dark solid lines in assembly

  7. Lime/dark green color in feature tree

  8. dimension/dimension lines not dark

Loading...