Cut views from 3D to drawings (SW2006)

Discussion in 'SolidWorks' started by Jean Marc, Sep 10, 2009.

  1. Jean Marc

    Jean Marc Guest

    HI
    We have the possibility to make a cut view in the 3D assy.
    I would like to use the same cut view in a drawing.
    Is it possible, and how?
    TIA
    JM


    Win XP, SW2006
     
    Jean Marc, Sep 10, 2009
    #1
  2. Jean Marc

    IYM Guest

    Honestly, the quickest way I do it all the time is to make a derived
    configuration in your assembly, orient the view the way you want (and
    save that view), then cut it the way you want it. (make sure you set
    the configuration of that cut feature to be suppressed in all other
    configurations you have)

    Next in your drawing, bring the view in and set the configuration of
    that view to the derived configuration...

    IYM
     
    IYM, Sep 10, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Shaded views in drawings

  2. SW2004 SP1 - Can't create section views in drawings!

  3. cut list item drawing views

  4. Really, really slow detail views in drawings.

  5. Explode Line Sketch in Detail Views of Drawings

  6. inserting sketch dimensions from annotation views automaticaly into drawing views

  7. wrap cut with sw2006

  8. SW2006 drawings (section view)

Loading...