Custom thead

Discussion in 'SolidWorks' started by cijunet, Jun 5, 2007.

  1. cijunet

    cijunet Guest

    I'm trying to draw a shaft that has an inside thread M30X1.5. Hole
    wizard does not have this option for a metric thread
    and also I don't think making a thread using sweep cut is the right
    solution. Any idea would be appreciated...
    Thanks
     
    cijunet, Jun 5, 2007
    #1
  2. cijunet

    TOP Guest

    You can do a revolve cut of a straight sided hole using the tap drill
    diameter and then apply a cosmetic thread in which you specify the
    thread callout. That is pretty much what Hole Wizzer does anyway.

    TOP
     
    TOP, Jun 5, 2007
    #2
  3. cijunet

    Anna Wood Guest

    On the lines of TOP's suggestion. Create you tap drill hole with a
    Legacy Hole from Hole Wizard, then add your cosmetic thread.

    Regards,

    Anna Wood
     
    Anna Wood, Jun 5, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. distribution of custom files

  2. CUSTOM MNU LOAD WICH WILL LOAD ALL OTHER CUSTOM FILES VIA MNL (HOW)

  3. Weird custom properties in my custom sheet format

  4. Get custom scale as a custom property

  5. link part custom props to drawing custom props

  6. Custom Tangent Lines, Custom Line Thickness

  7. custom-custom properties list

  8. Copy a custom prop value to another custom property?

Loading...