Curve - plane intersection

Discussion in 'SolidWorks' started by Fradrigo, Dec 1, 2007.

  1. Fradrigo

    Fradrigo Guest

    Hi all,

    is it posible to find a point of intersection between plane and edge of a
    surface?

    Thanks
     
    Fradrigo, Dec 1, 2007
    #1
  2. Fradrigo

    Wayne Tiffany Guest

    Select the plane & the surface, then go to Tools/Sketch Tools/Intersection
    Curve.

    WT
     
    Wayne Tiffany, Dec 1, 2007
    #2
  3. Fradrigo

    That70sTick Guest

    The intersection of a surface and a non-coincident curve (or edge) is
    a point. You can place a point at this intersection using a datum
    point or a point in a 3D sketch. In a 3D sketch, you can constrain a
    point with on-surface to the surface and coincident to the curve.
     
    That70sTick, Dec 2, 2007
    #3
  4. Fradrigo

    Heikki Leivo Guest

    is it posible to find a point of intersection between plane and edge of
    In a case of a planar surface or a plane, you can open a sketch, create a
    sketch point and add a Pierce relation beetween the point and the edge.

    -h-
     
    Heikki Leivo, Dec 2, 2007
    #4
  5. Fradrigo

    Fradrigo Guest

    Finally made it! Great advices, thanks!


     
    Fradrigo, Dec 3, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Intersection thru Lisp

  2. self intersection

  3. 3D-Intersection of 3 plane shapes

  4. Create a curve from the intersection of two pre-defined curves?

  5. Intersection datum curve in Wildfire??

  6. Helical curve swept on a helical curve

  7. Basic Question copying from plane to plane

  8. Intersection Curve with Sold Body not Closed???

Loading...