Creating DWF Views

Discussion in 'AutoCAD' started by Mr. B, Dec 3, 2006.

  1. Mr. B

    Mr. B Guest

    Acad 2005 + DWF Viewer 7.2

    I 'thought' that if you had a Drawing file with User created Views in it, and
    you then created a DWF file (I'm using the Optimized for Plotting PC3), that
    your VIEWS would show up in the DWF file!!!

    Because I don't have any Views listed in the DWF viewer application... nothing
    for that matter in any of the Navigator Panes.

    Or am I missing something here...

    Thanks in Advance...

    BruceF
     
    Mr. B, Dec 3, 2006
    #1
  2. Mr. B

    News Guest

    If its a 3D view you want you need to type at the command point 3ddwfpublish

    Then when you open the file in DWF VIEWER you can manipulate the file the
    same what as you would in a ACAD drawing environment.

    There is are also several dedicated DWF news group at
    discussion.autodesk.com
     
    News, Dec 8, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. DWF HTML Code??

  2. DWF Properties

  3. automatic dwf creation when saving

  4. DWF viewer for a mac?

  5. creating a drawing each time creating a part or assembly

  6. inserting sketch dimensions from annotation views automaticaly into drawing views

  7. Pagesetup Manager and Plot loses "View" Option when deleting and creating named views

Loading...