COSMOS & RAM

Discussion in 'SolidWorks' started by Wayne Tiffany, Feb 13, 2004.

  1. Wayne Tiffany

    Wayne Tiffany Guest

    On a machine configured & purchased to run COSMOSWorks 2004, is there a
    significant advantage to stocking it with 4GB RAM? I know that SW2004 can
    utilize more RAM with the 3GB switch scenario, but will COSMOS take
    advantage of that as well? Will it utilize dual processors? Any other
    thoughts?

    WT
     
    Wayne Tiffany, Feb 13, 2004
    #1
  2. Wayne Tiffany

    qwerty Guest

    With XP, it seems not usefull until now to have more than 2Go.

    A dual processor is an advantage.
     
    qwerty, Feb 14, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. treedepth and treemax and ram

  2. to read .ram file ?

  3. Industry standard RAM file format

  4. SV: How Much Ram Are you running these days?

  5. SWX2004 - 512 or 1024 RAM ?

  6. Sniffing bad RAM

  7. Is RAM the moset important thing in a workstation?

  8. Is there a point to the 3gb switch if you have 2 gb of ram

Loading...