COPY

Discussion in 'AutoCAD' started by Hans Persson, Oct 18, 2003.

  1. Hans Persson

    Hans Persson Guest

    Hi!
    How do I copy an item from one dwg to another? Tried to use "machprop" but
    can't get it to work.
    Hans Persson
     
    Hans Persson, Oct 18, 2003
    #1
  2. Hans Persson

    Conny Klasson Guest

    Old way (pre 2000), create a block with wblock comand.
    Then use insert command in the other drawing.

    New way, open both drawings, use Copy/Paste or
    drag drop between the drawings.

    If the item alerady is a block then use Design Center.

    MatchProp if for "painting" properties like color, layer, e.t.c
    between items in the same drawing.

    Hoppas detta hjälper!

    Conny
     
    Conny Klasson, Oct 18, 2003
    #2
  3. Hans Persson

    Darin/Liz Guest

    1. Go to File menu then select copy with base point.
    2. Go to the other drawing then Paste it in.
    It should come in at the same location as it was in the original drawing you
    copied it from.
     
    Darin/Liz, Oct 18, 2003
    #3
  4. Hans Persson

    mine Guest

    in 2002 with both drawings open, go to the edit pull down (i think) and
    select copy command of your choice, select next dwg from pull down menu, go
    back to edit pull down and select appropriate command, works for me
     
    mine, Nov 1, 2003
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Turning a CADD Standards paper copy....

  2. copy & paste pulldown image

  3. open & vl-file-copy long file name bug & workaround

  4. copy vports command

  5. copy/incriment

  6. copy objects from PS to MS

  7. Copy multiple

  8. Copy circle to endpoints of all lines selected

Loading...