copy & Paste

Discussion in 'AutoCAD' started by Michal Peer, Jul 23, 2007.

  1. Michal Peer

    Michal Peer Guest

    sometimes the copy & paste command don't work, in drawings from other arch. offices.( i have the AutoCAD 2000 ver.)
    The paste command may only work with the insertion point option, or not at all. when it happens, it is also impossible to use the wblock command.
    is there any solution?
    Thank u
    Michal
     
    Michal Peer, Jul 23, 2007
    #1
  2. Michal Peer

    Denny Guest

    Checkout following link:


    http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=7450124&linkID=9240618
     
    Denny, Jul 23, 2007
    #2
  3. Michal Peer

    Michael Bulatovich Guest

    Michael Bulatovich, Jul 23, 2007
    #3
  4. Michal Peer

    Denny Guest

    /snip
    Dude! I suggest you reread the original post and the link I gave.

    The poster said it was drawings *received* from *other* offices!

    I would suggest that the *other office*, like may using 2007, save to
    Autocad 2000 when distributing drawings, because not everyone has 2007
    etc......

    The *other offices* need to apply the fix to their AutoCad2007, resave the
    drg to 2000 and reissue to Michal who should then be able to open the
    drawings.
     
    Denny, Jul 23, 2007
    #4
  5. Michal Peer

    Michael Bulatovich Guest


    You're right. I should stay out of any thread dealing with the new, improved
    versions...hehe <blushes>
     
    Michael Bulatovich, Jul 23, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. copy & paste pulldown image

  2. Hierarchy lost after copy and paste

  3. Copy & paste sheets/views between files?

  4. Copy Paste Surface from one part to a new part

  5. Copy & Paste from Autocad 2007 with SW 2006

  6. Copy-paste

  7. problem with copy / paste

  8. Copy/cut paste and ObjectAdded event

Loading...