copy lines from a block in a drawing

Discussion in 'AutoCAD' started by PP, Feb 24, 2004.

  1. PP

    PP Guest

    Is it posible to copy a few line's from a block into a drawing, without
    exploding the block?
     
    PP, Feb 24, 2004
    #1
  2. PP

    Michael Bulatovich Guest

    You could open both files, and CUT and PASTE only the selected objects...
    (depending on your version, of course, you may have options to paste as a
    block or not. Hell-you may not even be able to CUT and PASTE, now that I
    think about it. When did those commands appear? R12WIN?)
     
    Michael Bulatovich, Feb 25, 2004
    #2
  3. PP

    Jim Claypool Guest

    You can do it with refedit
     
    Jim Claypool, Feb 25, 2004
    #3
  4. PP

    Daniel J. Ellis Guest

    But only full blown. Unfortunately refedit isn't in LT (or at leeast 2002
    LT)


    DJE
     
    Daniel J. Ellis, Feb 25, 2004
    #4
  5. PP

    JACK Goldstein Guest

    Why not copy the block to another portion of the drawing and explode
    the copy to get what you want?
     
    JACK Goldstein, Feb 27, 2004
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. defining a block in a lisp and check if the block is already defined in the drawing

  2. Create Block from Drawing View lines?

  3. Block From Drawing view lines?

  4. How do I create a solidworks title block from a cad title block

  5. Get block attributes from a block inside an xref

  6. insert block (inserting specific block from dwg file

  7. insert block vs. copy block

  8. Make single line from parallel lines w/o deleting lines

Loading...