connecting details to parts...

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by meld_b, Oct 1, 2004.

  1. meld_b

    meld_b Guest

    Can someone explain how details are hooked to parts... I had to bring
    some files off backup and for some reason some of the parts started
    saying "Can not open" is there a way to redraw the part and rehook it to
    the detail, which does open. These are really simple parts, there's more
    time in the detail than the actual part.
    Thanks,
    -meld
     
    meld_b, Oct 1, 2004
    #1
  2. meld_b

    dakeb Guest

    Meld, Could it be your parts are failing cos they have features created in
    assemblies? Try opening the highest level assy before opening the parts and
    drawings. If you have to redraw your parts you will have to redo the detail
    too. Make sure you shut down everything in session first.
     
    dakeb, Oct 1, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SKILL Qn: Connecting a variable with a function

  2. connecting a wide wire net to gnd!/vdd!

  3. Connecting bus signals to gnd

  4. Why the two connecting resistors is merged?

  5. Diffusion layer connecting is prohibited, how should I write rules?

  6. Facing problem while connecting to Matrix DB

  7. VB: Connecting to SW Clarification

Loading...