Complex Sheet Metal - castrol oil can

Discussion in 'SolidWorks' started by exh, Oct 25, 2008.

  1. exh

    exh Guest

    exh, Oct 25, 2008
    #1
  2. exh

    TOP Guest

    You wouldn't do those old Castrol oil cans in sheet metal. That would be
    in lofts and sweeps territory. SW won't do warped surfaces like that in
    sheet metal.

    TOP
     
    TOP, Oct 28, 2008
    #2
  3. exh

    MikeWhy Guest

    It's two simple truncated cones, and a missing third cone demarking the
    filler opening. It'll layout pretty easily by hand, and even easier with the
    3D sketch of the intersections. The faired juncture between the base and
    spout is only mildly interesting, since it will be formed by a roller die
    (also pretty straightforward). If you're really after a problem and a
    project, try wheeling and spooning it by hand. The layout is straight
    textbook stuff.
     
    MikeWhy, Nov 2, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.