command line issue...

Discussion in 'AutoCAD' started by chris, May 11, 2006.

  1. chris

    chris Guest

    on an install a user has here autocad mechanical has suddenly started
    asking for him to locate the drawing to be opened via the command line
    and not the usual browsing via a window method.

    does anyone have any ideas on how to disable / remove this function?

    thanks in advance.
     
    chris, May 11, 2006
    #1
  2. chris

    Philippe Guest

    chris a écrit :
    Set FILEDIA to 1.

    Philippe
     
    Philippe, May 11, 2006
    #2
  3. chris

    chris Guest

    worked!

    thank you.
     
    chris, May 11, 2006
    #3
  4. chris

    chris Guest

    worked!

    thank you.
     
    chris, May 11, 2006
    #4
  5. chris

    chris Guest

    worked!

    thank you.
     
    chris, May 11, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. draw line to middle of 2 picked lines then offset that line help...

  2. how to read line by line from a file through a OCEAN script

  3. Insert a Cell on an angled line, and have the line break - automatically?

  4. Insert a Cell on an angled line, and have the line break - automatically?

  5. Issue with REGION command - region_issue.dwg (0/1)

  6. Leader line issue

  7. Drawing line on command line.

Loading...