Command for changing planes?

Discussion in 'SolidWorks' started by Dennis, Feb 22, 2004.

  1. Dennis

    Dennis Guest

    Hi,

    what is the command for changing to another plane,
    when in part editing mode?

    TIA,

    Dennis
     
    Dennis, Feb 22, 2004
    #1
  2. Dennis

    matt Guest

    Changing the plane a 2D sketch is on is done by right mouse button on the
    sketch, "edit sketch plane". You must be out of the sketch in order for
    this to work.
     
    matt, Feb 22, 2004
    #2
  3. Dennis

    People Guest

    Expand the feature that the sketch is part of in the Feature manage tree -->
    right cick on the sketch itself --> choose edit sketch plane --> then
    choose the new sketch or face for the sketch to be on

    Neil
    www.solidworktips.com
    (soon to be revitalized)
     
    People, Feb 22, 2004
    #3
  4. Dennis

    Dennis Guest

     
    Dennis, Feb 22, 2004
    #4
  5. Dennis

    Dennis Guest

     
    Dennis, Feb 23, 2004
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. UCS with a view and clipping planes

  2. Clipping planes on or off

  3. Intersection of two planes in VB. Planes created by reading out a Database in VBA

  4. creating datum planes in wF3

  5. Autosize planes Macro

  6. Macro for planes

  7. Cursor changing and not changing back

Loading...