Color Printer

Discussion in 'AutoCAD' started by Sarah Hollier, Sep 12, 2003.

  1. Using ACAD Map 5, what would people recommend for a color printer that
    prints up to 11X17. I a looking for any recommendations, suggestions,
    ideas. I would prefer a laser color printer to an ink-jet one. Thanks for
    the advice.

    Sarah
     
    Sarah Hollier, Sep 12, 2003
    #1
  2. Sarah Hollier

    Talsky Guest

    depends how much money you have available.

    For less then $500, I am happy with my Epson 1280.
    If you want to spend less then $700 there is the Epson 2200.
    Both of these are very good ink-jets.

    For about $6000 the HP 8500 is terrific I think. This is a laser color and
    black ane white printer, with 3 trays for different size paper.

    Jack Talsky
     
    Talsky, Sep 14, 2003
    #2
  3. Sarah Hollier

    jonesr Guest

    HP makes a 12X18 full bleed for less than $400 - check hp.com
     
    jonesr, Sep 15, 2003
    #3
  4. Sarah Hollier

    Jim Mims Guest

    This I've got to see.
    A color laserjet that does 12"x18" for less than $400.
    Model number, please.

    - Jim
     
    Jim Mims, Sep 15, 2003
    #4
  5. Sarah Hollier

    Jim Mims Guest

    I don't know what the offerings are concerning ledger color lasers, but if
    you'll consider inkjet, I would like to recommend the HP1700 as a lower
    priced alternative.

    - Jim
     
    Jim Mims, Sep 15, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.