Civil Engineer's Arc

Discussion in 'AutoCAD' started by SJUNE, Mar 4, 2004.

  1. SJUNE

    SJUNE Guest

    does anyone know how to draw an arc in autocad using the following info:

    Delta= 122Deg. 44min. 30sec.
    arc=224.941'
    r=105.00'
    t=192.35'

    this info is from a civil engineer.

    thank you.
     
    SJUNE, Mar 4, 2004
    #1
  2. SJUNE

    Michael Bulatovich Guest

    Draw some constructive geometry, use the ARC command, and follow the
    prompts....

    (Those damned engineers! Always trying to confuse the masses with math!)
     
    Michael Bulatovich, Mar 4, 2004
    #2
  3. SJUNE

    bestafor Guest

    HiHo;
    Before I had civil software, I draw a line from the PC to the radius point.
    Then rotate the line the Delta angle. Draw a arc from "line end-radius-line
    end".
     
    bestafor, Mar 4, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. interesting civil problem

  2. Arc overlapping on another arc

  3. civil 3d points

  4. programms for engineer Pro Engineer Wildfire wuth moduls

  5. 2005/05/22 PTC Pro Engineer Wildfire V2.0 M120, PTC Pro Engineer Wildfire V2.0 For XP64, new !

  6. civil engg plan profile sheet setup

  7. ACAD LT 2006/ Civil 3D 2006/ MAP 2006 etc...

Loading...