Civil 3D Network Deployment Image

Discussion in 'AutoCAD' started by pcchenard, Nov 5, 2004.

  1. pcchenard

    pcchenard Guest

    I seem to be having problems creating a deployment image for Civil 3D 2005. It just seems to hang and never finish. I had a similar problem when I created an image for LDT 2005 and found that I just needed to disable my virus software while creating the image. But that doesn't seem to help in this case.

    Any ideas what the problem might be?
     
    pcchenard, Nov 5, 2004
    #1
  2. pcchenard

    jpostlewait Guest

    I had a similar issue with LDD 2005.
    I went to a workstation installed the NIW locally and built the server image from the workstation.
    Don't know why this worked but it did. I did have a tech here from my reseller who suggested that as a workaround.

    John Postlewait
    IS Department
    George Butler Associates, Inc.
     
    jpostlewait, Nov 12, 2004
    #2
  3. pcchenard

    pcchenard Guest

    That's what I have always done. I never put the NIW on the server.

    I still haven't gotten this to work well. The image I created basically took about 10 hours to complete. Which is a little rediculous.
     
    pcchenard, Nov 12, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. deployment image for SP1?

  2. Network Deployment Problem for AutoCAD LT 2K4

  3. Copy Acad 2004 Network Deployment

  4. Network deployment & Take home copy

  5. Network Deployment of Map3d on Server2003 Group Policy

  6. Network deployment requires UNC path for log file

  7. 2005 Network Deployment questions

Loading...