Change the view in Hierarchy editor for iterative instance

Discussion in 'Cadence' started by Ben, Dec 21, 2005.

  1. Ben

    Ben Guest

    Dear all,

    I would simulate a pixel detector with 10000 pixels. The schematic is
    too big (~500 transistors / pixel) to be simulate with Bsim3 models. So
    I'd create a view veriloga for the pixel. I use the Hierarchy Editor to
    choose the view to simulate for each instance.

    I use iteratives instances. For 80 columns of 120 rows, I have an
    instance Column_detector<79:0> and inside this instances I'd put an
    instance pixel<119:0>.

    I can't choose the pixel column x - row y in schematic and the others in
    veriloga. I would a solution easy to use, I need to simulate only one
    pixel in schematic at first, then a group of 9 pixels... etc.

    Please, without solutions, it's 6 months of study for nothing...

    Thanks
    Ben
     
    Ben, Dec 21, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. difference between an instance terminal, terminal, pin, and instance pin?

  2. get view found by design->hierarchy->descend

  3. SKILL: Virtuoso command to Save View/Restore View WITH Hierarchy

  4. config cellviews in Hierarchy Editor vs. VHDL configurations for AMS Designer i.e. ncsim

  5. Select Hierarchy Instance Name without using hiCreateAppForm

  6. instance flip option missing in Schematic Editor.

  7. Select schematic instance from instance iterations

  8. Change the Instance ID

Loading...