can't print more than one copies

Discussion in 'AutoCAD' started by NG, Aug 12, 2004.

  1. NG

    NG Guest

    The following appears to AutoCAD 2005 and ABS 2005 with HP DesignJet 500.

    I have "avoid run out of memory" checked so the processing of printing is
    done at the PC. The problem is that i can't print two copies of the same
    drawing. Although i enter "2" for "number of copies" when the process of
    printing the second copy starts, the printing process window disappears
    and finally only one copy is printed.

    The plotter is on a local network and the second PC on that network prints
    the copies specified.

    Any ideas/solutions?
     
    NG, Aug 12, 2004
    #1
  2. NG

    NG Guest

    I copied the PC3 file from the second PC, but didn'y help. Any other ideas?

    Thanks...
     
    NG, Aug 12, 2004
    #2
  3. NG

    Homerloew Guest

    I had a similar problem a while back. I downloaded the most recent driver from HP and created a new PC3 file, all works well now.

    If that doesn't work kick it!

    don
     
    Homerloew, Aug 12, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Could ipcBeginProcess do more than one thing but not step by step ?

  2. Wildfire locking up when more than one window is open

  3. API: LibraryFeature with more than one refernce (COM/C++)

  4. Drawings of more than one part?

  5. FeatureWorks can't recognize more than one feature at a time.

  6. Sketch has more than one open contour

  7. join more than one surfaces to one solid

  8. insert block from external drawing contains more than one blocks

Loading...