CanoniR3200Color printer

Discussion in 'AutoCAD' started by PChiu, Apr 29, 2004.

  1. PChiu

    PChiu Guest

    We have a new CanoniR3200 color printer to replace the HP8500 color rpinter.

    It works fine in Acad2004, but we still have dwgs in R14.
    So in R14, we have to plot as through System printer, but is that a way to fool it print as Hp8500 setup or similar way ?

    The problem plot through System printer is you need to set the CanoniR3200 as default, then may forget to set back to the B/W printer.
    Secondly, the 11x17 paper size will not stay, everytime you need to go in and chage it from letter to 11x17.

    I tried setup as HpGL2, pick Hp8500, but set it to print from CanoniR3200, it work fine in Acad2004, but in R14 it mesh up.
    Only print out B/W and all solids mesh up as going all over the print.

    I cheked Canonweb site, no driver for R14 nor Acad2004

    Any help ? Please.
    Thanks.
     
    PChiu, Apr 29, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Changing Printer Support File Path via Lisp

  2. Can't enter printer name in macro

  3. Change printer to user.

  4. default printer

  5. Change the Printer Configuration Search Path

  6. PRINTER SETUP

  7. Setting up an unusual printer in .cdsplotinit

  8. Help needed with Techjet, Canon, HP, Heidi Wide-Format-Printer, Plotter

Loading...