Can OrCad Spice 9 read netlist input?

Discussion in 'Cadence' started by S-M-B, Sep 9, 2003.

  1. S-M-B

    S-M-B Guest

    Hi, All:

    i had a simple question but I couldn't figure out...
    I know OrCad can generate netlist from capture - a schematics editor,
    but could it read a SPICE input text file generated by hand?
    If possible, which HELP file(s) I can find it?

    TIA.

    SMB


    PS: A example netlist input file:

    ------------------------
    i1 0 1 dc 1.0 0.0
    R1 1 0 4.0
    R2 1 2 1.0
    R3 2 3 6.5
    R4 1 3 0.5
    R5 3 4 .05
    R6 4 0 1.0

    ..printcurrent dc all
    ..printnode dc all
    ..end
    -------------------------
     
    S-M-B, Sep 9, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Can I connect two global nodes in a Dracula LVS Spice netlist?

  2. spectre hung? any other way of doing spice netlist extraction from extracted view for post-layout si

  3. Importing and simulate a spice netlist

  4. Can I do LVS between gate netlist and transistor netlist in Diva?Thanks

  5. Converting synthesized VHDL/Verilog to spice netlist

  6. How to run simulation with spice netlist coming from dracula lpe drawing?

  7. Query regarding to read and simulate the spice netlist in Cadence Spectre

  8. Pin names not used when extracting layout --> spice netlist

Loading...