Can I do an exploded view in a weldment part?

Can I do an exploded view in a weldment part?

Ben

 

Ben,

You can create a new part configuration (top level or derived) and use the
"Move/copy" feature to separate your "parts". Suppress the "Move/Copy"
features in original configuration, and leave unsuppressed in the "exploded"
version.

As an alternative, right click on the "cut list" folder, and choose "Save
bodies" to individual parts. If you use the "assembly" option when saving
the parts, SW will automatically create an assembly which can be exploded
using standard techniques.

I've emailed an example to your company email address.

Hope this helps.

John

 

No... you can create an assembly from the solid bodies(r click on the cut
list folder and select save bodies, at the bottom of the dialog box is an
option to create an assembly) and then do an explode of the assembly.

 

Thanks Guys, Wry and Dry, I am familiar with the making of an assembly and
all, but was hoping you could do it locally in the part. Just like John
mentioned. Thanks for the suggestions, I will likely use them both.

Ben