Can extrusions be removed?

Discussion in 'AutoCAD' started by John Doe, Nov 24, 2008.

  1. John Doe

    John Doe Guest

    Besides using the Windows shortcut key Ctrl+Z immediately after
    extruding an object, is there a way to undo an extrusion?

    I guess the answer applies to most AutoCAD products. Specifically,
    I'm talking about Autosketch.

    Thanks.
     
    John Doe, Nov 24, 2008
    #1
  2. John Doe

    E. Wijbrandts Guest

    Hi John D.
    In plain AutoCad you can make a SECTION normal to the extrusion
    direction to recover you initial contour and then erase the extrusion.
    Depending on how you choose your section angle, you can produce for
    instance an ellipse from a cylinder.

    good luck & grtz, Erik
     
    E. Wijbrandts, Nov 25, 2008
    #2
  3. John Doe

    Bill DeShawn Guest

    If the extrusion is in the Z axis, and if I remember correctly, I
    believe that FLATTEN (an EXPRESS TOOL) will work.
     
    Bill DeShawn, Nov 26, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. using a lisp memory address - messages removed

  2. Spam being removed

  3. SP2.0 Removed from site

  4. Hidden lines removed still show cosmetic threads

  5. high quality "hiddem lines removed" view creation for brochures

  6. SW08 UI customisation - Matt Writes articles removed?

  7. How can I prevent a Block from being removed?

  8. Hide "Hatch boundary associativity removed"

Loading...