Calcomp drivers in 2005

Discussion in 'AutoCAD' started by mark_ridgway, May 14, 2004.

  1. mark_ridgway

    mark_ridgway Guest

    Just upgraded to Autocad 2005.
    when i try to plot to our Calcomp Techjet 5336 over a network it trys to plot to a file even when the plot to file dialog box is unchecked.Plotting/Printing works fine on all the other printing devices we have.
    In Autocad 2004 it worked fine.
     
    mark_ridgway, May 14, 2004
    #1
  2. mark_ridgway

    Pat Trudeau Guest

    Mark,

    Try rebuilding the pc3 file. I had the same problem with an Oce TDS600.
    Something must happen in the translation from 2004 to 2005.

    Pat


    plot to a file even when the plot to file dialog box is
    unchecked.Plotting/Printing works fine on all the other printing devices we
    have.
     
    Pat Trudeau, May 18, 2004
    #2
  3. mark_ridgway

    Greg H Guest

    I have tried rebuilding the .pc3 file multiple times. Other people have had
    success in resolving the forced plot to file issue this way but it has not
    worked for me.
     
    Greg H, May 18, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wildfire 2005/UG 2005/Ansys 2005/ Catia v5r15

  2. Calcomp Techjet 5500 Plotter users

  3. Calcomp 5500 techjet plotter

  4. LDF drivers can be installed for AutoCAD 2005

  5. Calcomp techjet 5336 driver on Autocad 2005

  6. CALCOMP 720 DRIVERS

  7. Calcomp 5536 and ADT 2005

Loading...